pipe flange
英 [paɪp flændʒ]
美 [paɪp flændʒ]
管道法兰；管凸缘
双语例句
- Oval metallic ring gaskets for steel pipe flange joints
GB/T9128.2-1988钢制管法兰连接用椭圆形金属环垫 - The Design of Shrink-Fit or Overlaying Internally Construction and Fabrication of Pipe and Flange
接管和法兰内壁热套衬或堆焊的结构设计及其制造方法 - Asbestos rubber sheet in which the structure of dense, good pressure, good heat resistance, and valves in the valve itself and the pipe flange connection, the use of a wide range.
其中石棉橡胶板结构致密，耐压性能好，耐温性能也很好，在阀门本身和阀门与管子的法兰连接中，使用极为广泛。 - Different-diameter pipe size head, also called tube diameter at different, used to connect different diameter of pipe or flange diameter changes on.
异径管也叫大小头，两端管口直径不同，用于连接不同直径的管子或法兰进行变径。 - Position the adjoining flange or the pipe to the Watts Flange Adapter and install the remaining bolts.
将邻近的法兰或管道定位到美国瓦茨法兰适配器上，安装剩下的螺栓。 - Flange gaskets are not interchangeable with other mechanical pipe couplings or flange gaskets.
法兰垫圈与其它机械管道连接器或法兰垫圈互换。 - Heating pipe for fuel oil tank leaked on the flange position which under the floor front the boiler, to be renewed.
在锅炉前部底处燃油柜中加热管的法兰盘处漏，需换新。 - For convenient assembling, a connection short pipe and connection flange are positioned at the inlet and outlet.
为了便于装配，在进、出口处均设有连接短管及连接法兰。 - When the minimum yield strength of the hub portion of flange is less than that specified for maching pipe, the marking shall also include the grade of the material of the pipe to be matched with the flange.
如果法兰颈部的最小屈服强度小于加工管的规定值，则标记内容应包括与法兰配套的管件材料等级。 - Gasket is a major element which connects the pipe and flange.
密封件作为管道和设备法兰连接的主要元件，对密封起重要作用。 - Porduct: steel pipe, elbow, flange, tee, reducer, pipe cap, pipe fitting.
主营产品：钢管，无缝钢管，弯头，法兰，三通，管帽，大小头，管件。 - High, medium, low pipe, flange sealing.
高，中，低管道，法兰密封。 - Process design of seamless pipe hot upsetting-extruding method for making flange Adaptive EFG-FE Coupling Analysis of Upset Extrusion
采用无缝钢管镦挤法兰突缘的工艺设计镦挤过程自适应耦合无网格-有限元法分析 - The Date-base system of pipe flange achieve the inquiring and strength checking of date about national standard pipe flange, and optimize the flange's dimensions if satisfied strength, and achieve the batch strength checking of FEA in Date-base
所建立的管道法兰数据库系统实现了国家标准管道法兰数据的查询与强度校核，在满足强度条件下优化法兰尺寸，在数据库中实现有限元强度校核的批处理 - The design, manufacture and installation methods of steel double pipe heat exchanger are introduced, realizing the equipment installation without tolerance and extra stress, avoiding forced assembly and assuring pipe flange without leakage.
介绍钢制套管式换热器的设计、制造和安装方法，实现了无公差、无附加力的设备安装，从根本上避免了强力组装，确保管系法兰无泄漏。 - The Research on the Database System of Standard Pipe Flange
标准管道法兰数据库系统的研究 - This paper describes the joining technology of FRP/ plastics composite structure piper with plane flange, and the technology design of contact between FRP/ plastics composite structure pipe and plane flange has been research.
论述FRP/塑料复合管道平面法兰的连接方式，同时对接头工艺设计进行了探讨。 - This paper introduces the method of partition the normal gas transmission to stop the aged pipe transmission by using the special flange and reducing pipe.
介绍了一种使用专用法兰和变径短管封堵煤气管道停止老化管道运行的新方法。 - An automatic CO2 welding device for elbow pipe and flange fillet weld joint is introduced in the paper.
介绍一种弯管和法兰角接接头填角焊的自动焊接装置。 - Status and Discussion about Application of Pipe Flange Standard in Pressure Vessels
管法兰标准在压力容器行业中的应用现状及探讨 - Introduction to the standard of metal cladding gasket used for pipe flange
管法兰用金属包覆垫片的标准介绍 - The system of date-base about pipe flange
管道法兰数据库系统 - Liner Plastic Compound Pipe with Flange
带法兰衬塑复合钢管 - In this paper proposing that pretensioning method prestressed reinforced concret precast pipe piling sheet has great market. Analysing the process of pipe piling sheet members periphery and flange.
先张法预应力钢筋混凝土预制管桩端板存在巨大市场，分析了管桩端板构件群边与法兰的生产工艺，指出法兰预制坯的生产方法决定端板的产品质量和生产成本。 - A method to calculate the weight of pipe flange and the internals of hydrogenation reactor has been obtained on the basis of a large number of analyzed data.
通过对大量数据的归纳分析，找到了一套接管法兰和内构件重量的计算方法。 - Lose Efficacy Analysis of Tooth Sealing Gasket at HP Loop Pipe Flange
高压导汽管法兰齿形密封垫片失效分析 - The structure of transmission pipe and special seal flange have been described.
文章对于制冷机主机的结构作了专门设计，采用了上下法兰密封结构与柔性传输杜瓦管，将更有利于制冷机的安装与维修。 - One of the used methods is spinning, that is spinning flanging for pipe, forming end-of-pipe flange.
要实现非焊接法兰连接的管需进行预加工，其方法之一是采用旋压，即对管口进行旋压翻边，形成管端法兰。 - The flange flaring machines, which is used to manufacture the pipe connector, is designed. Compared with welded flange processing, the spinning machine is not only energy-saving, high reliability, but also greatly improve production efficiency and the utilization of materials.
使用该旋压机相比焊接式法兰加工，不但节能、可靠性高，还可大大提高生产效率及材料的利用率，且被加工零件的外表光滑美观。